Tough Box 17 gal tote size
- Length, lid on
- 26 3/4"
- Width across the lid rim
- 18"
- Height with lid
- 12 1/2"
- Capacity
- 17 gal
- Sold at
- WebstaurantStore, Tractor Supply
- Colors
- Black, yellow lid
- Sizes from
- Store and maker listings: measure one of yours before you cut
WebstaurantStore lists it at 26 3/4" × 18" × 12 1/2" with a recessed snap lid, the size of the Hyper Tough and Commander 17 gal, so one rack takes all three.
A 3×3 rack for Tough Box 17 gal totes
It holds 9 totes (153 gallons) and stands 62 1/4" wide, 26 3/4" deep and 45 1/2" tall against a wall, with an open top. Change the layout in the configurator above; the numbers on this page are for the 3×3.
- 13 × 2x4 × 8 ft
- 104 × 2-1/2" screws
- 2 angle brackets to fix it to the wall studs
Cut list
| Part | Qty | Stock | Cut to (length × width) | Notes |
|---|---|---|---|---|
| Legs | 8 | 2x4 SPF | 42 1/2" | Vertical posts |
| Rails | 4 | 2x4 SPF | 62 1/4" | Horizontal full-width members (top/bottom x front/back) |
| Runners | 18 | 2x4 SPF | 26 3/4" | Front-to-back tote supports |
| Spacer Blocks | 2 | 2x4 SPF | 10 1/2" | Assembly jig for row spacing (reuse during build) |
Ladder layout
Every leg gets the same marks. Measure down from the top end of the leg to the top edge of each runner:
- Row 1 (top): 3 1/4"
- Row 2: 17 1/4"
- Row 3 (bottom): 31 1/4"
Posts 18 3/4" apart leave 15 3/4" between the two runners of a bay, so the 18" rim rests on 1 1/8" of each. Cut the two spacer blocks to 10 1/2": stood on one runner, a block sets the next one.
Step by step
Buy the lumber and screws
For a 3×3 rack of Tough Box 17 gal totes: 13 2x4s 8 ft long, 104 2-1/2" screws and 2 angle brackets for the wall studs.
Cut every piece
Cut 8 legs at 42 1/2", 4 rails at 62 1/4", 18 runners at 26 3/4" and 2 spacer blocks at 10 1/2", as in the cut list. A stop block on your saw keeps identical parts identical.
Mark the ladder layout
On one leg, mark the top edge of the top runner 3 1/4" down from the top end, then a mark every 14" below it. Square the marks across and copy them onto all 8 legs.
Build the leg pairs
Screw a runner across a front and a back leg on every mark, with two 2-1/2" screws at each end; a spacer block (10 1/2") standing on one runner sets the next. The middle pairs get runners on both faces, the two end pairs on their inside face only.
Join the pairs with the rails
Stand the pairs on the two bottom rails with 18 3/4" between posts, so the runners of each bay are 15 3/4" apart, and screw the two top rails across the top ends of the legs.
Fix it to the wall and load it
Screw two angle brackets from the top back rail into two wall studs, then slide the totes in with their lids on: the 18" rim rests on 1 1/8" of each runner. Heaviest totes at the bottom.
Totes that fit the same rack
These totes share the Tough Box 17 gal's length and rim width and are no taller, so they hang on the same runners:
- Commander 17 gal - 26 7/8 × 18 × 12 1/2 in
- Hyper Tough 17 gal - 26 7/8 × 18 × 12 1/2 in
Other 17 gallon totes are a different size and need their own rack: HDX 17 gal, Greenmade 17 gal, Hyper Tough 17 gal low-profile, Brightroom 17 gal, Sterilite 17 gal.
FAQ
What size is the Tough Box 17 gal tote?
26 3/4" long, 18" wide across the lid rim and 12 1/2" tall with the lid on, from store listings. It holds 17 gallons and is sold at WebstaurantStore and Tractor Supply. Measure one of yours before you cut.
Will a rack for Tough Box 17 gal totes fit other 17 gallon totes?
Yes for the Commander 17 gal and Hyper Tough 17 gal: they have the same length and rim width and are no taller, so they hang on the same runners. Not the HDX 17 gal, Greenmade 17 gal, Hyper Tough 17 gal low-profile, Brightroom 17 gal or Sterilite 17 gal: they are a different size, so pick them in the configurator for a rack that fits.
How much lumber does a 3×3 rack for Tough Box 17 gal totes take?
13 2x4s 8 ft long, plus 104 2-1/2" screws and 2 angle brackets for the wall studs. It holds 9 totes (153 gallons) and stands 62 1/4" wide, 26 3/4" deep and 45 1/2" tall.
How far apart are the runners for Tough Box 17 gal totes?
Set the posts 18 3/4" apart, so the two runners of a bay are 15 3/4" apart and the 18" rim rests on 1 1/8" of each. Each row sits 14" above the last: the tote's 12 1/2" height plus a 1 1/2" gap to slide it out.
Build it, guided every step
The Fixie iOS app turns this plan into a customized build for your exact space - pick your dimensions, get an auto-generated cut list, order materials in one tap, and follow the steps with 3D previews. Have something else in mind? Describe it or snap a photo and Fixie will design your own build from scratch - your first design is free.
Download Fixie on the App StoreTote rack plans for other totes
All tote rack plans and the 3D configurator
HDX The Home Depot
Commander Lowe's
Greenmade Costco
Member's Mark Sam's Club
Hyper Tough Walmart
Tough Box Tractor Supply, Walmart
- Tough Box 17 gal
- Tough Box 27 gal
- Tough Box 40 gal Wheels
- Tough Box 40 gal